[NSRCA-dist8] Option-160

[astropuppy]

Great news Jim. Congratulations on another design.

Lets just hope you don't have to issue a recall for this one. <grin>



On Thu, Jun 3, 2010 at 8:49 PM, J N Hiller <jnhiller at earthlink.net> wrote:

> Thought I would let you all know the Option-160 is out of the shop and was
> flown today, very conservatively. I'm still working with the motor set-up.
> The motor was well used before I got it and it needs bearings. That'll be
> the next rainy day project.
> 5 degrees of stab travel felt about normal (full flying stab). It's
> probably
> close. I won't know until I start flying the sequence.
> Bench setup was close, needed 6% left roll trim and 12% up. Next will be
> lateral balance evaluation.
> Jim Hiller
>
>
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20100605/3c4ba046/attachment.html>