[NSRCA-dist8] Option-160

[Rex]

Ah yes... the Joys Of Trimming!
 
> From: jnhiller at earthlink.net
> To: nsrca-dist8 at lists.nsrca.org
> Date: Thu, 3 Jun 2010 19:49:31 -0700
> Subject: [NSRCA-dist8] Option-160
> 
> Thought I would let you all know the Option-160 is out of the shop and was
> flown today, very conservatively. I'm still working with the motor set-up.
> The motor was well used before I got it and it needs bearings. That'll be
> the next rainy day project.
> 5 degrees of stab travel felt about normal (full flying stab). It's probably
> close. I won't know until I start flying the sequence.
> Bench setup was close, needed 6% left roll trim and 12% up. Next will be
> lateral balance evaluation.
> Jim Hiller
> 
> 
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20100604/a0c71b84/attachment.html>