[NSRCA-discussion] jr 9303 help needed

[ronclark tds.net]

Here ye, Here ye on the poor programming. I still miss my old 10X.

Ron

On Tue, Jul 17, 2012 at 2:51 PM, <AWorrest at aol.com> wrote:

> I neglected to add that if you don't want flaperons with dual ailerons,
> the best way is to inhibit the Flap channel in the DeviceSEL, use the
> Normal wing type and dual/mate the Flap or another inhibited channel to the
> aileron channel.
>
> If you use the Flaperon wing type but don't want flaperons, then go
> immediately to the FLAP SYS. menu in the Function List and zero out the
> default flap values. When the Flap Sw isn't in position 1, both ailerons
> will be either up or down if the menu isn't changed. Some people have
> instead inhibited the Flap channel in the DeviceSEL and used the Flaperon
> wing type. This will work on the 9303 and 12X but not on the 11X. IMO this
> is poor programming.
>
> Allan
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120717/04b73851/attachment.html>