[NSRCA-discussion] jr 9303 help needed

[AWorrest at aol.com]

I neglected to add that if you don't want flaperons with dual ailerons, the 
best way is to inhibit the Flap channel in the DeviceSEL, use the Normal 
wing type and dual/mate the Flap or another inhibited channel to the aileron 
channel.

If you use the Flaperon wing type but don't want flaperons, then go 
immediately to the FLAP SYS. menu in the Function List and zero out the default 
flap values. When the Flap Sw isn't in position 1, both ailerons will be either 
up or down if the menu isn't changed. Some people have instead inhibited 
the Flap channel in the DeviceSEL and used the Flaperon wing type. This will 
work on the 9303 and 12X but not on the 11X. IMO this is poor programming.

Allan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120717/c97775f9/attachment.html>