[NSRCA-discussion] jr 9303 help needed

[Ronald Van Putte]

Yeah, and I miss my 1975 Kraft KP-7Z (NOT!).

Ron

On Jul 17, 2012, at 2:57 PM, ronclark tds.net wrote:

> Here ye, Here ye on the poor programming. I still miss my old 10X.
>  
> Ron
> 
> On Tue, Jul 17, 2012 at 2:51 PM, <AWorrest at aol.com> wrote:
> I neglected to add that if you don't want flaperons with dual ailerons, the best way is to inhibit the Flap channel in the DeviceSEL, use the Normal wing type and dual/mate the Flap or another inhibited channel to the aileron channel.
> 
> If you use the Flaperon wing type but don't want flaperons, then go immediately to the FLAP SYS. menu in the Function List and zero out the default flap values. When the Flap Sw isn't in position 1, both ailerons will be either up or down if the menu isn't changed. Some people have instead inhibited the Flap channel in the DeviceSEL and used the Flaperon wing type. This will work on the 9303 and 12X but not on the 11X. IMO this is poor programming.
> 
> Allan
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120717/316b101a/attachment.html>