[NSRCA-discussion] Cleaning up a burr

[Michael Cohen]

The parts list calls the part a cam follower, but it is the same part number LH/RH.  I can see what looks like a nick right at the end of the bore, so I am assume that is preventing me from putting it all the way down.  I will call Richard at YS and see what he says.....  but just in case, anyone have a spare 160DZ case? 
 



From: Tom.Koenig at actewagl.com.au
To: nsrca-discussion at lists.nsrca.org
Date: Mon, 31 Oct 2011 12:44:24 +1100
Subject: Re: [NSRCA-discussion] Cleaning up a burr






Mike,
 
I read that there is some uncertainty if there is indeed a burr inside? If there is...a tricky one indeed, as you would have to somehow get inside the cam chamber to remove it....hmmmmm. Is it the intake lifter or exhaust?
 
Have you checked that the correct lifter is in the correct bore? Dumb question I know, but you don’t want to run lifters swapped.
 
No real answer for you yet-sorry!
 
Tom
 


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael Cohen
Sent: Monday, 31 October 2011 12:22 PM
To: NSRCA
Subject: [NSRCA-discussion] Cleaning up a burr
 

While assembling a YS160, I found a lifter would not seat properly.  Right at the edge where the lifter bore meets the crank bore there must be a little burr.  How can I get this cleaned up yet still maintain the tight tolerance in the bore for the lifter?
 
Mike Cohen


************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses. Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20111031/44041228/attachment.html>