[NSRCA-discussion] Icepoint

[Bob Wilson]

Thanks Arch,
I'd like to use the 160FX.
Does Karl Mueller or Aeroslave have a website?  I googled them both and
wasn't too successful.

Bob

On Sun, Nov 30, 2008 at 3:33 PM, Archie Stafford <astafford at swtexas.net>wrote:

>  The OS 1.60FX will work great.  You can get the wrap around header from
> Karl Mueller.  He will make them custom for each application.  I think a lot
> of guys are running the Aeroslave pipe as well as the Perry pump for the
> fuel delivery system.  The 1.40RX is also a great setup, although down on
> power from the 1.60.
>
>
>
> Arch
>
>
>
>
>  ------------------------------
>
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Bob Wilson
> *Sent:* Monday, December 01, 2008 1:59 AM
> *To:* General pattern discussion
> *Subject:* [NSRCA-discussion] Icepoint
>
>
>
> I recently picked up a slightly, damaged in shipment, "Icepoint" from a
> friend that made periodic trips to China.  The airplane is brand new and the
> damage was minor, but the covering on the fuse was unbonded and I had to
> strip the whole thing.  That's done, and now I'm getting ready to
> recover...no problem.
>
>
>
> I'd like to put either a O.S. 140 or O.S. 160 on this airplane.  Any
> comments?
>
>
>
> Also, I notice that the O.S. 140 comes in a rear exhaust version, and a
> header and pipe is available.  I doesn't appear, however, that the O.S.160
> is available as a rear exhaust.  Where would I go to get the necessary
> header and pipe for the 160?
>
>
>
> Thanks
>
> bw
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081130/04947cd0/attachment.html>