[NSRCA-discussion] Dualsky 6360 11T

[James Oddino]

We flew the 11T in the YAK or SU or whatever it is today and it worked  
great.  Used an APC 20x10 and flew vertical for as far as one wanted  
to go.  It turned 6500 rpm at 61 Amps.  Didn't register the voltage  
but it was probably down at about 34 volts.  This is with a TP5300  
10s4p with 150 flights on it.  Everything was extremely cool and I'm  
sure we could push it with a bigger prop if the batteries could take  
it.  I didn't want to exceed 65 Amps with these.  If the 22x12 at 6000  
rpm is too slow for you the 11T is the way to go but you'll need to  
give up some diameter.

The plane flew pretty nice with just a small amount of rudder to up  
elevator mix.

Jim


On Dec 11, 2007, at 7:06 PM, chris moon wrote:

> Hi Jim..
> tell us more about your Integral. Are you going w/ the Dualsky? 11 or
> 12 turn?
>
> Chris
>
> James Oddino wrote:
> > I'm looking for a spinner for an electric Composite-Arf Integral.
> > I've been using and like the ES Composites spinners but their 80  
> mm is
> > a couple of mm shy of the 3.25 inch diameter nose. Has anyone tried
> > this combination and does it look okay? What are the other options
> > besides Tru-Turn?
> >
> > Jim O
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> >
> >
>
>
> i’m is proud to present Cause Effect, a series about real people  
> making a difference. Learn more  
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071214/be08b4d2/attachment.html