[NSRCA-discussion] Hysol 9462

Gray E Fowler gfowler at raytheon.com
Mon May 15 05:39:38 AKDT 2006


Stuart

Something is wrong. Remove and clean the adhesive off. I am very familiar 
with many Hysol adhesives, but unfamiliar with Hysol 9462. In addition I 
cannot locate any info on 9462  on the Hysol-Henkel website(all epoxies 
have a 93XX designation), which leads me to believe that it is a 
repackaged-renamed adhesive or it is NOT an epoxy, could be an acrylic. If 
it has a VERY strong smell then it is an acrylic. What ever it is you have 
a mix ratio error, and it is not going to get better if it has been 24 
hours above 75F.



Gray Fowler
Principal Chemical Engineer
Composites Engineering



Stuart Chale <schale at optonline.net> 
Sent by: nsrca-discussion-bounces at lists.nsrca.org
05/13/2006 05:21 PM
Please respond to
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>


To
"'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
cc

Subject
[NSRCA-discussion] Hysol 9462







For those who have experience with Hysol 9462, sold as aeropoxy through 
Bob Violett and others.
I used it last night for the first time.  I have the cartridge system and 
long mixing applicators.  After about 19 or 20 hours the glue has not 
hardened.  It has thickened but it is still soft enough to move around. Is 
this normal or should I pull the parts apart clean and re-glue?  The 
application was done in my basement and I am guessing that the temp is 
about 70 degrees. 
Thanks for any help.
Stuart Chale
 
 _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/4801402f/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 145 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/4801402f/attachment.gif 


More information about the NSRCA-discussion mailing list