[NSRCA-discussion] Hysol 9462
Dave Harmon
K6XYZ at valornet.com
Mon May 15 05:49:16 AKDT 2006
9462 is made by Loctite and available from Grainger.
Regards
Dave Harmon
NSRCA 586
K6XYZ[at]valornet[dot]com
Broken Arrow, Ok.
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gray E
Fowler
Sent: Monday, May 15, 2006 8:39 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Hysol 9462
Stuart
Something is wrong. Remove and clean the adhesive off. I am very
familiar with many Hysol adhesives, but unfamiliar with Hysol 9462. In
addition I cannot locate any info on 9462 on the Hysol-Henkel
website(all epoxies have a 93XX designation), which leads me to believe
that it is a repackaged-renamed adhesive or it is NOT an epoxy, could be
an acrylic. If it has a VERY strong smell then it is an acrylic. What
ever it is you have a mix ratio error, and it is not going to get better
if it has been 24 hours above 75F.
Gray Fowler
Principal Chemical Engineer
Composites Engineering
Stuart Chale <schale at optonline.net>
Sent by: nsrca-discussion-bounces at lists.nsrca.org
05/13/2006 05:21 PM
Please respond to
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
To
"'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
cc
Subject
[NSRCA-discussion] Hysol 9462
For those who have experience with Hysol 9462, sold as aeropoxy through
Bob Violett and others.
I used it last night for the first time. I have the cartridge system
and long mixing applicators. After about 19 or 20 hours the glue has
not hardened. It has thickened but it is still soft enough to move
around. Is this normal or should I pull the parts apart clean and
re-glue? The application was done in my basement and I am guessing that
the temp is about 70 degrees.
Thanks for any help.
Stuart Chale
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/ac78c802/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 145 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/ac78c802/attachment-0001.gif
More information about the NSRCA-discussion
mailing list