[NSRCA-discussion] OS exhaust

[Ron Lockhart]

Not if you have a dremel tool.  <VBG>
I mount mine much the same as noted below.
And yea, my Vivat has a 2 by 3 inch double Immelmann shaped hole
to access the O ring and lord mount.
Bottom of plane is black, hole is not noticeable in flight.

Ron Lockhart
  ----- Original Message ----- 
  From: Scott Smith 
  To: NSRCA Mailing List 
  Sent: Monday, June 05, 2006 6:44 PM
  Subject: Re: [NSRCA-discussion] OS exhaust


  But with designs like the Brio and Vivat, aren't you limited to the inlet and/or stinger?  Access to the mid-pipe area is a problem on this type of airplane.
    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of rcmaster199 at aol.com
    Sent: Monday, June 05, 2006 6:32 PM
    To: nsrca-discussion at lists.nsrca.org
    Subject: Re: [NSRCA-discussion] OS exhaust 
      

    The only thing I could add to Nat's statement is that in my exhaust set-up the pipe is also soft mounted on a single Lord mount. Same location as Nat. Been doing that for at least the last 10 years and have never had a failure in any exhaust component in a 2 stroke powerplant. Really don't remember the last time a coupler blew either, but then again I don't fly as much as many do.

    Matt
     
    -----Original Message-----
    From: Nat Penton <natpenton at centurytel.net>
    To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
    Sent: Mon, 5 Jun 2006 17:01:48 -0500
    Subject: Re: [NSRCA-discussion] OS exhaust


Anthony
With soft mounted engines I have never had a header failure with a single 
pipe support placed about 1/2 to 1 inch behind the CG of the pipe/coupler.

----- Original Message ----- 
From: "Anthony Romano" <anthonyr105 at hotmail.com>
To: <nsrca-discussion at lists.nsrca.org>
Sent: Monday, June 05, 2006 3:53 PM
Subject: [NSRCA-discussion] OS exhaust


> How are you mounting your exhaust? I have an RX w/ Macs' header and
> Aeroslave pipe mounted in two spots. One near the stinger the other at the
> neck of the pipe. The mount at the neck broke loose and the plane seemed a
> tad louder but now I am debating its usefullness. Any thoughts?
>
> Anthony
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.7.0/346 - Release Date: 5/23/2006
>
> 



-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.7.0/346 - Release Date: 5/23/2006

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060605/72af1872/attachment.html