[NSRCA-discussion] Question for Experts on AF21

[Derek Koopowitz]

Hey Monte,

You are correct... the bottom of a regular Figure M must be inverted but
that isn't what Don's question is about and it isn't called a Figure M
either - it is a double stall turn.  At the bottom of the half loop in the
Double Stall Turn  there is a 1/2 roll integrated and direction is not
specified - that is actually a KE half loop in the F3P sequence.  Don's
other question also related to the trombone which is also done at KE and
again, the integrated 1/2 roll direction in the 1/2 loop (KE) is not
specified.  Don's 3rd question is in the horizontal square where KE 1/4
loops are in KE as well and all those there is a 1/2 roll integrated in
those loops and those are not specified as to the direction.

Best,
-Derek

On Sun, May 2, 2021 at 8:56 AM Monte Richard <
mrichard at compassengineering.com> wrote:

> Derek
>
> Isn’t the bottom of a figure M always inverted? So in that case the roll
> has to be set based on being inverted on the bottom of the figure M.
>
> Sent from my iPhone
>
> On May 2, 2021, at 10:21 AM, Derek Koopowitz via NSRCA-discussion <
> nsrca-discussion at lists.nsrca.org> wrote:
>
> 
>
> Yes, roll directions are pilots option.
>
>
>
> *From: *NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on
> behalf of NSRCA List <nsrca-discussion at lists.nsrca.org>
> *Reply-To: *<tocdon at netscape.net>, NSRCA List <
> nsrca-discussion at lists.nsrca.org>
> *Date: *Sunday, May 2, 2021 at 6:03 AM
> *To: *NSRCA List <nsrca-discussion at lists.nsrca.org>
> *Subject: *[NSRCA-discussion] Question for Experts on AF21
>
>
>
>
> AF21.11, 12 and 9.   Roll direction in rolling loop and corners segments
> optional?  Is the roll at the bottom of the Figure M need to show inverted
> at the bottom or optional upright?  Corners of horizontal square inside,
> outside or optional?  Top of trombone?  No roll directions or orientation
> stated in maneuver descriptions so it appears the roll directions are all
> optional.
>
>
>
> Thanks,
>
> Don
>
> _______________________________________________ NSRCA-discussion mailing
> list NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> <https://linkprotect.cudasvc.com/url?a=http%3a%2f%2flists.nsrca.org%2fmailman%2flistinfo%2fnsrca-discussion&c=E,1,zgdDmoSUMmOcgz1_MoZLx6i6h36BbIKb1WYNcRlNDpaB_bL46wSaZV4r-RaUcdY12-n7UblOIn6Yhthkc7AqrHQ4PJxl5KZO2UlyZa0X18Nymp_hvo4mQUO6Mg,,&typo=1&ancr_add=1>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
>
> https://linkprotect.cudasvc.com/url?a=http%3a%2f%2flists.nsrca.org%2fmailman%2flistinfo%2fnsrca-discussion&c=E,1,98MGHm6JLaMdpButWD88TreGAZ3D20nc1vK4JNswsMoM7776m4AG8nmAGJA5zVfFjd0tIe388BORIBhSNLYB_-LO8uhax-wb6kQaNcdZbm8,&typo=1
>
>
> (c) 2021 Compass Engineering & Consultants, LLC. All rights reserved. This
> electronic transmission, and any attachments hereto, is intended only for
> the use of each individual recipient named above and may contain
> information belonging to the sender that is confidential, proprietary, is
> subject to copyright, constitutes a trade secret or is legally privileged.
> If you are not an intended recipient, you are hereby notified that any
> disclosure, copying, distribution or the taking of any action in reliance
> on the contents of this information is strictly prohibited. If you have
> received this transmission in error, please immediately (i) notify the
> sender, (ii) permanently delete the original and all copies of this
> electronic transmission and all attachments hereto, and (iii) destroy all
> printouts of this electronic transmission and all attachments hereto.
> Please note that electronic transmissions to and from the sender may be
> monitored by the sender's employer. Thank you for your cooperation.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20210502/9405cf52/attachment.html>