[NSRCA-discussion] Plettenberg Advance 30-10 ESC - Questions

[flyintexanmark]

Larry, I had excellent results with the OS controller. I found the pletty to be extremely tolerant of different propeller choices without high amp or high battery usage in normal flying conditions.  I recently have seen a pletty with the d3 controller and that looked like an excellent combination. Mark
-------- Original message --------From: Larry Diamond via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> Date: 6/4/20  9:45 PM  (GMT-06:00) To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org> Subject: [NSRCA-discussion] Plettenberg Advance 30-10 ESC - Questions I’m getting ready to build an Alchemy and committed to buying another plane that should arrive late August/early September, and will have it built/delivered RTF. Both will get a new Plettenberg Advance 30-10. I’ve purchased the Pletty for both planes already. This is a big change for me as I have been flying a Himax 6330-210 Pro w/ a Castle HV80 ESC since 2011. This set up has been reliable for me, but I am ready for a change. I really like the Castle ESCs, but I don’t want to fight the Pletty. Also I have seen some data that the Pletty can pull up around 90+ Amps based on some posts I have read on various forums. I don’t know if it is normal for a Pletty to be over 80 Amps. What is the preferred ESC for the Pletty?What settings for the ESC?How is your Throttle Curve set up? I have a Futaba 18sz. I will likely be flying a Falcon 3 blade 19  x 13.5    to   20 x 12.5 Best Regards, Larry Diamond(812) 630-9592 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200605/4e617f01/attachment.html>