[NSRCA-discussion] Lipo - Repair/replace balance tap? Or repin?

[Randy Forbus]

The battery usually reaches it useful limits before you would have to do that, I've never had to do it

________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of james woodward via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, January 8, 2020 6:19 PM
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Lipo - Repair/replace balance tap? Or repin?

Gents,

Got a question.  How often are you required to replace a balance tap due to a damaged slot or pin?  I am going to replace one of the 5S battery taps, because I think there is an intermittent connection.  My plan is to do a simple cut-off and solder an entire new lead.  I was not planning to "repin" the balance tap itself.

Any pros/cons or advice?  I haven't been paying attention over the years if this was discussed before?

Thanks,
Jim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200108/abc85d27/attachment.html>