[NSRCA-discussion] Neu bearings- Old style Neu from year 2013

[Matt Griffitt]

I am a good source Don and Tim I have full ceramic in stock

Matt Griffitt
ADGaero.com
334.380.8228

On Fri, Jan 3, 2020, 12:13 PM Jon Lowe via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Look close at the bearings. Typically the sizes are stamped on them, or
> they are molded 8nto the seals. Boca is a good place to look.
> ------------------------------
> On Friday, January 3, 2020 tim pritchett via NSRCA-discussion <
> tjpritchett at aol.com; nsrca-discussion at lists.nsrca.org> wrote:
> Don,
>    I'm running the same set up in my Pandora (Neu + V3) If you come up
> with a source, please share the information...thanks!
>
>
> -----Original Message-----
> From: Don Szczur via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
> To: nsrca-discussion <nsrca-discussion at lists.nsrca.org>
> Sent: Wed, Jan 1, 2020 11:09 pm
> Subject: [NSRCA-discussion] Neu bearings- Old style Neu from year 2013
>
> I am getting ready to put a Neu motor into an airplane and was checking
> the bearings.  Pretty sure they are OK but I took apart the motor and
> figured I might as well change them if some are readily available out
> there.  If anyone has a source of bearings (front and rear- they look
> identical) let me know.  Its for a Neu F3A motor used in an earlier Brenner
> Contra V3 unit (e.g., Joseph's 2013-2015 WC model).
>
> Thanks in advance,
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200103/256f3db2/attachment.html>