[NSRCA-discussion] trimming

[Peter Vogel]

Recommend you get the Hebert trimming guide...

In order of priority, if it pulls to the canopy on a vertical upline,
assuming you started from 0 thrust, +0.5 degrees wing incidence, 0.2
degrees stab incidence:

1. Check elevator and stab halves, they must not be warped and within 0.1
degree of being equal on both sides.
2.  Move the CG back
3.  Increase down thrust, but no more than a total of 0.5 degrees down
thrust.

Peter+

On Mon, Oct 28, 2019 at 2:44 PM John Fuqua via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Real quite on the list.   Need some advice.    What is the trimming fix
> for a plane that is pulling to the canopy in a vertical upline ??
>
>
>
>
>
> John
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



-- 
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark
Associate Vice President, Academy of Model Aeronautics District X
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20191028/1fee42c3/attachment.html>