[NSRCA-discussion] Jeti Opti Spin 90 Pro Question

[Cliff Bradford]

The ESC arming is normal I think, I'm using a Mezon and it arms as soon as
it has power, the only way to have a safe system is to use dual rate or
conditions and set a flat throttle curve. Some Jetti radios will arm and
disarm the ESC from the transmitter but I don't think this function will
work on other transmitters.
    I have only used a jetti box to set my ESC up and there is no "save"
function. But I have used it to program other ESC's and when I return
settings are as I left them. There should be a way to save it but I can't
help you.
     You choose end points with a jetti box but again I have no idea how to
do it with out a box,
     Hopefully others will chime in but I think most use a box for set up
and that's why such a low response.  Cliff
On Sun, Nov 12, 2017 at 10:52 AM W Anthony Abdullah via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Looks like I will be ordering the programming box.
>
> Sent from my iPad
>
> On Nov 12, 2017, at 12:22 PM, Jon Bruml <jon at techstyles.com> wrote:
>
> I have excellent results with spin and mezon and have only used the
> programming boxes to set  fixed end points
>
> Jonathan Bruml
> Techstyles
> www.techstyles.com
> _____________________________
> From: W Anthony Abdullah via NSRCA-discussion <
> nsrca-discussion at lists.nsrca.org>
> Sent: Sunday, November 12, 2017 11:04 AM
> Subject: [NSRCA-discussion] Jeti Opti Spin 90 Pro Question
> To: Vicente Bortone <vincebrc at gmail.com>, General pattern discussion <
> nsrca-discussion at lists.nsrca.org>
>
>
> I got zero responses last time I posted it, so I am sending it out again
> in the hopes that I had a delivery failure of some kind.
>
> I would really appreciate some help with my ESC programming issues.
>
> I have a Neu Contra combo being controlled by the Jeti Opti Spin 90 Pro on
> which I am trying to set the idle down function.
>
> Using the idle down function on my 14MZ I am able to set a point at which
> it will idle smoothly, then completely stop when I hit the assigned switch.
>
> The problems;
> 1. The ESC will arm even if the switch is in the stop position, is this
> normal?
> 2. If I unplug the battery and plug it back in, the settings are forgotten
> 3. I would like fixed end points, what do I need to do to save those
> settings in the ESC?
>
> I do not have the Jeti programmer, but will order one if necessary.
>
> Thank you
>
> Anthony
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-- 
Cliff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20171112/c095fc81/attachment.html>