[NSRCA-discussion] Jeti Opti Spin 90 Pro Question

[W Anthony Abdullah]

Looks like I will be ordering the programming box. 

Sent from my iPad

On Nov 12, 2017, at 12:22 PM, Jon Bruml <jon at techstyles.com> wrote:

> I have excellent results with spin and mezon and have only used the programming boxes to set  fixed end points 
> 
> Jonathan Bruml
> Techstyles
> www.techstyles.com
> _____________________________
> From: W Anthony Abdullah via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
> Sent: Sunday, November 12, 2017 11:04 AM
> Subject: [NSRCA-discussion] Jeti Opti Spin 90 Pro Question
> To: Vicente Bortone <vincebrc at gmail.com>, General pattern discussion <nsrca-discussion at lists.nsrca.org>
> 
> 
> I got zero responses last time I posted it, so I am sending it out again in the hopes that I had a delivery failure of some kind.
> 
> I would really appreciate some help with my ESC programming issues.
> 
> I have a Neu Contra combo being controlled by the Jeti Opti Spin 90 Pro on which I am trying to set the idle down function.
> 
> Using the idle down function on my 14MZ I am able to set a point at which it will idle smoothly, then completely stop when I hit the assigned switch.
> 
> The problems;
> 1. The ESC will arm even if the switch is in the stop position, is this normal?
> 2. If I unplug the battery and plug it back in, the settings are forgotten
> 3. I would like fixed end points, what do I need to do to save those settings in the ESC?
> 
> I do not have the Jeti programmer, but will order one if necessary.
> 
> Thank you
> 
> Anthony
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20171112/b69d4c6f/attachment.html>