[NSRCA-discussion] Jeti Opti Spin 90 Pro Question

[Jon Bruml]

I have excellent results with spin and mezon and have only used the programming boxes to set  fixed end points

Jonathan Bruml
Techstyles
www.techstyles.com<http://www.techstyles.com>
_____________________________
From: W Anthony Abdullah via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Sunday, November 12, 2017 11:04 AM
Subject: [NSRCA-discussion] Jeti Opti Spin 90 Pro Question
To: Vicente Bortone <vincebrc at gmail.com<mailto:vincebrc at gmail.com>>, General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>


I got zero responses last time I posted it, so I am sending it out again in the hopes that I had a delivery failure of some kind.

I would really appreciate some help with my ESC programming issues.

I have a Neu Contra combo being controlled by the Jeti Opti Spin 90 Pro on which I am trying to set the idle down function.

Using the idle down function on my 14MZ I am able to set a point at which it will idle smoothly, then completely stop when I hit the assigned switch.

The problems;
1. The ESC will arm even if the switch is in the stop position, is this normal?
2. If I unplug the battery and plug it back in, the settings are forgotten
3. I would like fixed end points, what do I need to do to save those settings in the ESC?

I do not have the Jeti programmer, but will order one if necessary.

Thank you

Anthony
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20171112/8e74ac96/attachment.html>