[NSRCA-discussion] Best way to limit AMPS

[Randy Forbus]

Bring your end point down


________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Vicente Bortone via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, July 20, 2017 4:16 PM
To: NSRCA NSRCA
Subject: [NSRCA-discussion] Best way to limit AMPS

Hello all,

I got the Mezon Lite and JR28 X.  What is the best way to limit the maximum amps?  I am getting about 86 amps and would like to get it down to around 70 amps max.  I tried the usual stuff using the % rate and power curve and didn't work.  I think I have something wrong in the controller set up.  The important ones I got are:

Unit Point Type Fixed
Initial Point 1.13 ms
End Point 2.00 ms
Autoinc End Point from 2.00 ms

I think the problem is in that last one but not sure.  Probably I got to reduced to 1.6 to 1.7 or so.

Any suggestions welcome,

Vicente "Vince" Bortone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170720/f7b972ac/attachment.html>