<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p>Bring your end point down<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="width: 98%; display: inline-block;">
<div id="divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> NSRCA-discussion <nsrca-discussion-bounces@lists.nsrca.org> on behalf of Vicente Bortone via NSRCA-discussion <nsrca-discussion@lists.nsrca.org><br>
<b>Sent:</b> Thursday, July 20, 2017 4:16 PM<br>
<b>To:</b> NSRCA NSRCA<br>
<b>Subject:</b> [NSRCA-discussion] Best way to limit AMPS</font>
<div> </div>
</div>
<div>
<div dir="ltr">
<div>Hello all,</div>
<div><br>
</div>
<div>I got the Mezon Lite and JR28 X. What is the best way to limit the maximum amps? I am getting about 86 amps and would like to get it down to around 70 amps max. I tried the usual stuff using the % rate and power curve and didn't work. I think I have
something wrong in the controller set up. The important ones I got are:</div>
<div><br>
</div>
<div>Unit Point Type Fixed</div>
<div>Initial Point 1.13 ms</div>
<div>End Point 2.00 ms</div>
<div>Autoinc End Point from 2.00 ms</div>
<div><br>
</div>
<div>I think the problem is in that last one but not sure. Probably I got to reduced to 1.6 to 1.7 or so.
</div>
<div><br>
</div>
<div>Any suggestions welcome,</div>
<div><br>
</div>
<div>Vicente "Vince" Bortone</div>
</div>
</div>
</div>
</div>
</body>
</html>