[NSRCA-discussion] Switch on the Jeti Mezon Lite 90 ESC

[Daniel Dupont]

I cut all mine, on previous discussion on RCGroups, Esprit model said they would still warranty them with gone.

I usually install a just connector for a cleaner look.

Sent from Daniel iPad Pro

> On Sep 1, 2016, at 09:41, Jeff and Claire via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> Are there any good reasons for leaving this switch on the Mezon Lite ESC?
> I use an external disconnect (4mm bullet) to arm the ESC.  Not really sure
> what this switch is for so in the past have just turned it on and zip-tied
> it out of sight.  Can I just cut the thing off and solder the two wires
> together?  Can't see carrying around the weight and/or possibility (albeit
> slim) of one more component that might fail.  Thanks for any insight-
> 
> Jeff Worsham 
> <winmail.dat>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion