[NSRCA-discussion] Switch on the Jeti Mezon Lite 90 ESC

[Jeff and Claire]

Are there any good reasons for leaving this switch on the Mezon Lite ESC?
I use an external disconnect (4mm bullet) to arm the ESC.  Not really sure
what this switch is for so in the past have just turned it on and zip-tied
it out of sight.  Can I just cut the thing off and solder the two wires
together?  Can't see carrying around the weight and/or possibility (albeit
slim) of one more component that might fail.  Thanks for any insight-

Jeff Worsham 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 7690 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160901/377e0e2b/attachment.bin>