[NSRCA-discussion] Hacker C-50 phenolic gluing

[Andre Bouchard]

I have used medium CA and it holds for a while, but BVM Aeropoxy type glue will essentially give you a permanent fix.  Just a thin film (to avoid imbalance) and position in the existing glue joints.

As Bob points out the ring probably does not matter.

Andre Bouchard



> On May 23, 2015, at 5:58 AM, Bob Kane via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> Success?  Not sure I would use that word.  I did glue one back on using medium CA. I later replaced the whole rotor.  I have heard of people running them without the phenolic ring.  The new-style fan is open back.
>  
> Bob Kane
> getterflash at yahoo.com
> 
> From: precisionaero via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
> To: Jas <justanotherflyr at gmail.com>; General pattern discussion <nsrca-discussion at lists.nsrca.org> 
> Sent: Friday, May 22, 2015 6:42 PM
> Subject: Re: [NSRCA-discussion] Hacker C-50 phenolic gluing
> 
> Bob Kane has done it, if I recall properly
> 
> 
> Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone
> 
> 
> -------- Original message --------
> From: Jas via NSRCA-discussion
> Date:05/22/2015 18:31 (GMT-05:00)
> 
> 
> To: General pattern discussion
> Subject: [NSRCA-discussion] Hacker C-50 phenolic gluing
> 
> I have my C-50 where the phenolic ring popped off the fan. Has anyone ever have success gluing this back on? If so, what glue did you use.
> 
> Thanks,
> Jason
> 
> Sent from my iP
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150523/ebc10157/attachment.html>