[NSRCA-discussion] Hacker C-50 phenolic gluing

[Bob Kane]

Success?  Not sure I would use that word.  I did glue one back on using medium CA. I later replaced the whole rotor.  I have heard of people running them without the phenolic ring.  The new-style fan is open back. Bob Kane
getterflash at yahoo.com
      From: precisionaero via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
 To: Jas <justanotherflyr at gmail.com>; General pattern discussion <nsrca-discussion at lists.nsrca.org> 
 Sent: Friday, May 22, 2015 6:42 PM
 Subject: Re: [NSRCA-discussion] Hacker C-50 phenolic gluing
   
Bob Kane has done it, if I recall properly

Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone

-------- Original message --------From: Jas via NSRCA-discussion  Date:05/22/2015 18:31 (GMT-05:00) 

To: General pattern discussion  Subject: [NSRCA-discussion] Hacker C-50 phenolic gluing 
I have my C-50 where the phenolic ring popped off the fan. Has anyone ever have success gluing this back on? If so, what glue did you use.

Thanks,
Jason

Sent from my iP
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150523/e77225a8/attachment-0001.html>