[NSRCA-discussion] YS 140 Sport stuck exhaust header

[Verne Koester]

Couple of possible options. If the socket is metric, try forcing on the closest larger us size. You might also be able to cut a slot in it with a cutoff wheel and use a large screwdriver to get it out. A photo for all to see might help with ideas. 
Verne

Sent from my iPhone

> On Aug 1, 2015, at 2:37 PM, Duane Beck via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> I have a YS FZ140 (Sport) that has an exhaust header attached with what appears to be a 10mm socket cap screw, or similarly broached fastener.  The socket has been damaged a bit by previous installation and removal, to the point where I can't get an allen wrench to hold tightly.  When I try to turn it, the wrench slips.  Any suggestions for how to remove the header?
> 
> Duane
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150801/b4d1a6db/attachment.html>