[NSRCA-discussion] flutter again

[Michael Ramsey]

But they are aircraft servos right? What voltage are they running on?

Paddles are normally used to reduce stick loads on ailerons that are linked
to a single servo (or control stick). I don't believe dual servo setups
benefit from aileron paddles.


On Fri, Sep 13, 2013 at 4:49 PM, George Kennie <geobet4evr at gmail.com> wrote:

> I'd be surprised Michael. These are Solar servos and I think they're
> either one or two micro/sec and there is no slop anywhere
>
>
> On Fri, Sep 13, 2013 at 5:43 PM, Michael Ramsey <milehipilot at gmail.com>wrote:
>
>> Could what you're experiencing have anything to do with the deadband
>> specification of the servo?
>>
>>
>> On Fri, Sep 13, 2013 at 4:34 PM, George Kennie <geobet4evr at gmail.com>wrote:
>>
>>> The plane with the tape hinges was modified with balance tabs that I
>>> made up at the exact weight of the total surface and added an additional
>>> sub small surface at a different incidence and nothing changed.
>>>
>>>
>>> On Fri, Sep 13, 2013 at 5:30 PM, Tom Simes <simestd at netexpress.com>wrote:
>>>
>>>> On 09/13/13 13:27, George Kennie wrote:
>>>> > It's an original foamy design with 3D size surfaces, Michael.
>>>> > It's a progression of my Rad-Tad series
>>>>
>>>> Have you considered taping on some quickie aerodynamic balancing tabs to
>>>> see if the behavior changes?
>>>>
>>>> --
>>>> Tom
>>>>
>>>> ======================================================================
>>>>    "Z80 system stack overflow.  Shut 'er down Scotty, she's
>>>>          sucking mud again!" - Error message on XENIX v3.0
>>>>
>>>> Tom Simes                                       simestd at netexpress.com
>>>> ======================================================================
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130913/b43aeaa0/attachment.html>