[NSRCA-discussion] flutter again

[George Kennie]

I'd be surprised Michael. These are Solar servos and I think they're either
one or two micro/sec and there is no slop anywhere


On Fri, Sep 13, 2013 at 5:43 PM, Michael Ramsey <milehipilot at gmail.com>wrote:

> Could what you're experiencing have anything to do with the deadband
> specification of the servo?
>
>
> On Fri, Sep 13, 2013 at 4:34 PM, George Kennie <geobet4evr at gmail.com>wrote:
>
>> The plane with the tape hinges was modified with balance tabs that I made
>> up at the exact weight of the total surface and added an additional sub
>> small surface at a different incidence and nothing changed.
>>
>>
>> On Fri, Sep 13, 2013 at 5:30 PM, Tom Simes <simestd at netexpress.com>wrote:
>>
>>> On 09/13/13 13:27, George Kennie wrote:
>>> > It's an original foamy design with 3D size surfaces, Michael.
>>> > It's a progression of my Rad-Tad series
>>>
>>> Have you considered taping on some quickie aerodynamic balancing tabs to
>>> see if the behavior changes?
>>>
>>> --
>>> Tom
>>>
>>> ======================================================================
>>>    "Z80 system stack overflow.  Shut 'er down Scotty, she's
>>>          sucking mud again!" - Error message on XENIX v3.0
>>>
>>> Tom Simes                                       simestd at netexpress.com
>>> ======================================================================
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130913/11cd3c65/attachment.html>