[NSRCA-discussion] Electrical Help
Keith Hoard
klhoard at hotmail.com
Wed Oct 23 09:47:29 AKDT 2013
And you can't push with a rope.
Sent from my iPhone
> On Oct 23, 2013, at 12:16, "Patrick Harris" <harris7148 at gmail.com> wrote:
>
> The formula for voltage drop is: Voltage Drop = I times R
>
> I = current in Amps
> R = Resistance of the conductor in Ohms
>
> So for any given length of wire, the resistance will increase as the size of the conductor deceases and the voltage will drop for any given level of draw (amps).
>
> In other words in your case, lets say you put a load on the circuit of a given length that draws x amount of amps, you will see a voltage drop as the conductor size reduces (resistance increases).
>
> As the formula is stated, if you have no "current" draw, you will have no voltage drop, but why would you have a circuit if you didn't put a load on it? In other words the voltage will drop.
>
> This will calculate it for you.
>
> http://www.calculator.net/voltage-drop-calculator.html
>
>
>> On Wed, Oct 23, 2013 at 3:42 AM, Del R <drykert2 at rochester.rr.com> wrote:
>> Ron .. I think you are referring to current or amperage.. Voltage won't show a drop.. 14 gauge is a no no.. except for lighting basically.. Low current drain.
>>
>> Del
>> ----- Original Message -----
>> From: Ron Hansen
>> To: NSCRA Discussion List
>> Sent: Tuesday, October 22, 2013 10:35 PM
>> Subject: [NSRCA-discussion] Electrical Help
>>
>> For a 120 VAC system, can anyone tell me what the voltage drop will be over a give length of 10 gauge, 12 gauge and 14 gauge copper wiring?
>>
>>
>>
>> Thanks
>>
>>
>>
>> Ron
>>
>>
>>
>> __________ Information from ESET Smart Security, version of virus signature database 8952 (20131022) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131023/d4f9b99a/attachment.html>
-------------- next part --------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list