[NSRCA-discussion] Help!!! Lipo recovery advise requested

astropuppy astropuppy at gmail.com
Mon May 20 09:10:40 AKDT 2013


if it was my pack I would hook it up in parallel to another same size pack
using the voltage equalizer mentioned in Don Atwood and my columns. In a
vary open - nonflammable - area.



On Mon, May 20, 2013 at 11:03 AM, Ihncheol <pnahobbies at sbcglobal.net> wrote:

> Mike,
> I usually do a low current (about 250mah) parallel charging with another
> pack that has about 70% charge left over.  I don't connect balance
> connector. Stop the charger a few times to check the voltage of the low
> voltage pack.
> Bunch of car/truck guys do that especially to 0 volt packs.
>
> Ihncheol
>
>
>
>
> Sent from my Samsung Galaxy Note® II
>
>
>
> -------- Original message --------
> From: mike mueller <mups1953 at yahoo.com>
> Date: 05/20/2013 8:51 AM (GMT-06:00)
> To: nsrca-discussion at lists.nsrca.org
> Subject: [NSRCA-discussion] Help!!! Lipo recovery advise requested
>
>
>   I have a brand new test pack that I gave to my best friend aptly named
> "Puff Daddy" who tests for us. He's a great resource because he beats the
> living crude out of Lipo's so you can feel assured that your doing well if
> PD is succesful with them.
>  We'll PD did himself very proud last week and discharged the 2 packs on
> the first attempt to 0 voltage. Opps he got distracted.
>  So how can I get some voltage into the packs so the charger can attempt
> to recover them? I know it's not going to be a text book operation but I'm
> willing to roll some dice to see if there is a way. One guy suggested using
> a nicad charger to pump in some juice.
>  At this point barring an exposion risk I have little to lose.
>  So any suggestions? TIA, Mike
>
> Mike Mueller
> http://us-mg5.mail.yahoo.com/neo/mo/www.f3aunlimited.com
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130520/bfe4fa88/attachment.html>


More information about the NSRCA-discussion mailing list