[NSRCA-discussion] E-Option-160

[George Kennie]

Boy jim,
I have to give you credit. When you get the shell completely enclosed do
you
glass the outside? For me, it's difficult to build conventionally and still
achieve
ultra light results. I like the way you rise to a challenge.
G.





On Thu, Jan 3, 2013 at 4:02 PM, J N Hiller <jnhiller at earthlink.net> wrote:

> Georgie I'll get off that other thread.
>
> I forgot to mention that I included a photo on the previous reply. They
> need
> to be reduced quit a bit to include here so I don't know how well the
> detail
> shows up.
>
> No vacuum bagging, standard construction except for the pre-formed sheet
> used to close in the T & B quarter sections. Fitting the edges over the
> glue
> backers is kind of a pain. This construction is very similar to the glow
> version which used 1/8 pre-formed sheet but without a lot of internal
> structure. The balsa parts are formed over a foam plug. Photos attached.
> A primary objective when detailing the E-version was to locate the
> batteries
> at or very near the CG positioning the wing as needed.
> I'm up to 131 KB, hope this goes.
> Jim
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130104/0a90b01f/attachment.html>