[NSRCA-discussion] jr ds8711 servo

[mike mueller]

 Bill Hannah I think

--- On Tue, 2/12/13, mike mueller <mups1953 at yahoo.com> wrote:


From: mike mueller <mups1953 at yahoo.com>
Subject: Re: [NSRCA-discussion] jr ds8711 servo
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Tuesday, February 12, 2013, 11:47 AM








Talking about Heathkit did anyone here know that Mike Gaishin who flys Intermediate in Michigan and makes the Contra's for Brenner holds a ton of patents for proportional radios?
 Mike worked for Heathkit in the 60's and 70's. He's a very interesting guy. His boss was an old pattern guy and happens to have been Steve Hannah's (San Diego) dad. His first name alludes me. Mike
--- On Tue, 2/12/13, Phil S. <chuenkan at comcast.net> wrote:


From: Phil S. <chuenkan at comcast.net>
Subject: Re: [NSRCA-discussion] jr ds8711 servo
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Tuesday, February 12, 2013, 10:28 AM



Well, I don't know about anyone else's age, but I built three different HeathKit radio systems, a 5-channel SS, a 5-channel dual stick, and a 7-channel dual stick.  They all worked (!!! ;-{O ), and I also remember reversing motor wires to change direction of the servo.  When I got a little more money, I graduated to Kraft Gold systems.  Still have a Signature 7-channel "dial-a-crash" that has been narrow-banded and is legal today.  Also, I just came into a Kraft Gold 5-channel SS Tx, on channel 56, no less, so it, too is currently legal.  Will I actaully fly them?  I think I'll stick with my DX-8, thank you...
Phil Spelt, KCRC Past President
AMA 1294 Scientific Leader Member
SPA 177 Board Member
(865)435-1476v, (865)604-0541c
On 2/12/2013 11:07 AM, Atwood, Mark wrote: 
Now I feel old… Ron help me.  I count on you for my comparitive youth.   I started with heath kit variants of the Kraft K-15 servo (and yes, I built them all).  The were slow, but hard to use.  Had to re-solder the motor wires to reverse direction back then.
Mark Atwood
Paragon Consulting, Inc.  |  President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
Phone: 440.684.3101 x102  |  Direct: 440-229-2502
Fax: 440.684.3102
mark.atwood at paragon-inc.com<mailto:mark.atwood at paragon-inc.com>  |  www.paragon-inc.com<http://www.paragon-inc.com/>





On Feb 12, 2013, at 10:57 AM, mike mueller <mups1953 at yahoo.com<mailto:mups1953 at yahoo.com>> wrote:


Good point Ron. We've come a long way. I used to use Bonner servo's on my 6 channel MinEx reeds. They were huge and you had to wire them yourself.  Mike
--- On Tue, 2/12/13, Ronald Van Putte <vanputter at gmail.com<mailto:vanputter at gmail.com>> wrote:

From: Ronald Van Putte <vanputter at gmail.com<mailto:vanputter at gmail.com>>
Subject: Re: [NSRCA-discussion] jr ds8711 servo
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Date: Tuesday, February 12, 2013, 9:38 AM

When I saw this e-mail, I chuckled.  Can anyone besides me remember when we used the Kraft KPS-18 servo?  As I remember it had 18 in-oz of torque!  It made up for its lack of torque by being slow too.

Ron Van Putte

On Feb 12, 2013, at 5:40 AM, Gordon Seeling wrote:

  
has 403oz of torque, same size as standard servo has anyone used it for rudder servo ??
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<http://us.mc1247.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
    _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<http://us.mc1247.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130212/6fba1bbe/attachment.html>