[NSRCA-discussion] Converting Futaba 12Z to 2.4

[Robert Gainey]

Hey Paul
I got the Futaba module a couple years ago. Works flawlessly in my 9Z or 9C. 



On Oct 7, 2012, at 11:28 AM, "Dave Harmon" <k6xyz at sbcglobal.net> wrote:

> Hi Paul…
> 
> I suggest that you stick with the Futaba module and receivers.
> 
> They are designed to work properly with the Futaba transmitters and work great.
> 
> I converted my 9z to 2.4g with the TM-8 and R6008HS rx 3 years ago and I could notice an improvement right away.
> 
> The servos do smooth out because the unit is not PCM anymore…the tx has to be set to PPM.
> 
> A couple of weeks ago I retired the 9z after 18 years and got the 18mz….the servos move Cadillac smooth.
> 
>  
> 
>  
> 
> Dave Harmon
> 
> NSRCA 586
> 
> K6XYZ[at]sbcglobal[dot]net
> 
> Sperry, Ok.
> 
>  
> 
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of plachance at cox.net
> Sent: Sunday, October 07, 2012 10:19 AM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Converting Futaba 12Z to 2.4
> 
>  
> 
> I forgot to add, I will need the transmitter module and at least 2 receivers. 
> 
>  
> 
> From: plachance at cox.net
> 
> Sent: Sunday, October 07, 2012 11:16 AM
> 
> To: NSRCA Mailing List
> 
> Subject: [NSRCA-discussion] Converting Futaba 12Z to 2.4
> 
>  
> 
>  
> 
> Hi all,
> 
>  
> 
> I have had bad luck asking question on here, but figured I would try again.  I want to convert my 12Z to 2.4.  What are my options?  Is there a conversion that is better than the rest?  Will I still get the same precision?  I heard in the past some of the conversions reduced the steps.  Thanks in advance.  Please no brand wars.  I have the transmitter and love it.  Just want to update it to 2.4.
> 
>  
> 
> Paul 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20121007/9cbc02f1/attachment.html>