[NSRCA-discussion] Converting Futaba 12Z to 2.4

[plachance at cox.net]

Hi all,

Thanks for the advice on my 12Z conversion.  Expensive conversion but I guess it will be worth it in the long run.

Paul

From: Robert Gainey 
Sent: Sunday, October 07, 2012 6:58 PM
To: General pattern discussion 
Subject: Re: [NSRCA-discussion] Converting Futaba 12Z to 2.4

Hey Paul
I got the Futaba module a couple years ago. Works flawlessly in my 9Z or 9C. 




On Oct 7, 2012, at 11:28 AM, "Dave Harmon" <k6xyz at sbcglobal.net> wrote:


  Hi Paul…

  I suggest that you stick with the Futaba module and receivers.

  They are designed to work properly with the Futaba transmitters and work great.

  I converted my 9z to 2.4g with the TM-8 and R6008HS rx 3 years ago and I could notice an improvement right away.

  The servos do smooth out because the unit is not PCM anymore…the tx has to be set to PPM.

  A couple of weeks ago I retired the 9z after 18 years and got the 18mz….the servos move Cadillac smooth.

   

   

  Dave Harmon

  NSRCA 586

  K6XYZ[at]sbcglobal[dot]net

  Sperry, Ok.

   

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of plachance at cox.net
  Sent: Sunday, October 07, 2012 10:19 AM
  To: General pattern discussion
  Subject: Re: [NSRCA-discussion] Converting Futaba 12Z to 2.4

   

  I forgot to add, I will need the transmitter module and at least 2 receivers.  

   

  From: plachance at cox.net 

  Sent: Sunday, October 07, 2012 11:16 AM

  To: NSRCA Mailing List 

  Subject: [NSRCA-discussion] Converting Futaba 12Z to 2.4

   

   

  Hi all,

   

  I have had bad luck asking question on here, but figured I would try again.  I want to convert my 12Z to 2.4.  What are my options?  Is there a conversion that is better than the rest?  Will I still get the same precision?  I heard in the past some of the conversions reduced the steps.  Thanks in advance.  Please no brand wars.  I have the transmitter and love it.  Just want to update it to 2.4.

   

  Paul  


------------------------------------------------------------------------------

  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20121008/11a43993/attachment.html>