[NSRCA-discussion] jr 9303 help needed

[Phil S.]

Ron, you won't after a little programming experience and a few flights!!!

On 7/17/2012 3:40 PM, ronclark tds.net wrote:
> Thanks everyone, I got it finally, I miss my old 10X.
> Ron.....
>
> On Tue, Jul 17, 2012 at 2:15 PM, <AWorrest at aol.com 
> <mailto:AWorrest at aol.com>> wrote:
>
>     Ron,
>
>     On the 9303 in the ACRO configuration, the trim on the master
>     channel is not carried over to the slave channel using the program
>     mixes. The only exception is the throttle channel. For the aileron
>     trim to be carried over, there are two ways of doing it. Either
>     set the wing type to flaperon or use the dual/mate and mate an
>     inhibited channel to the aileron channel.
>
>     Allan
>
>
>     In a message dated 7/15/2012 7:00:32 PM Central Daylight Time,
>     ronclark at tds.net <mailto:ronclark at tds.net> writes:
>
>>     I'm trying to program my aileron servos on two different
>>     channels. I've tried a standard mix, as well as a flaperon mix.
>>     The problem is I cannot get the trim to work on the slave
>>     channel. Help..............
>>     Ron
>
>
>
>     _______________________________________________
>     NSRCA-discussion mailing list
>     NSRCA-discussion at lists.nsrca.org
>     <mailto:NSRCA-discussion at lists.nsrca.org>
>     http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-- 
Phil Spelt, KCRC President
AMA 1294 Scientific Leader Member
SPA 177 Board Member
(865) 435-1476v, (865) 604-0541c

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120717/aead16f9/attachment.html>