[NSRCA-discussion] jr 9303 help needed

[ronclark tds.net]

Thanks everyone, I got it finally, I miss my old 10X.

Ron.....

On Tue, Jul 17, 2012 at 2:15 PM, <AWorrest at aol.com> wrote:

> Ron,
>
> On the 9303 in the ACRO configuration, the trim on the master channel is
> not carried over to the slave channel using the program mixes. The only
> exception is the throttle channel. For the aileron trim to be carried over,
> there are two ways of doing it. Either set the wing type to flaperon or use
> the dual/mate and mate an inhibited channel to the aileron channel.
>
> Allan
>
>
> In a message dated 7/15/2012 7:00:32 PM Central Daylight Time,
> ronclark at tds.net writes:
>
> I'm trying to program my aileron servos on two different channels. I've
> tried a standard mix, as well as a flaperon mix. The problem is I cannot
> get the trim to work on the slave channel. Help..............
> Ron
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120717/de5e603f/attachment.html>