[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[Peter Vogel]

Hmm.  So you just overlap a bunch of shrink wrap until you get up to the OD
you need?  There's a fair amount of space between the 5mm shaft and the
prop bore when I test fit it.

Peter+

On Mon, Jan 9, 2012 at 9:09 AM, J N Hiller <jnhiller at earthlink.net> wrote:

>  I found telescoping sizes of heat shrink tubing in a package #278-1627B
> from Radio Shack that when shrunk onto a 5 mm shaft bush nicely to the
> common 1/4" prop bore.****
>
> Jim Hiller****
>
> ** ******
>
> -----Original Message-----
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org]*On Behalf Of *Peter Vogel
> *Sent:* Sunday, January 08, 2012 10:44 PM
> *To:* General pattern discussion
> *Subject:* [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
> Q60?
>
> ** ******
>
> I've found lots of bushings to adjust an APC prop hub to a smaller shaft,
> but I haven't found anything that seems like it would work with the Q60's
> 5mm bolt shaft...  looking for ideas...****
>
> ** ******
>
> Thanks,****
>
> Peter+****
>
> ** ******
>
> -- ****
>
> Director, Fixed Wing Flight Training****
>
> Santa Clara County Model Aircraft Skypark****
>
> ****
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120109/d8654fad/attachment.html>