[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[J N Hiller]

It’s more sanitary than wrapping the shaft with tape.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Peter Vogel
Sent: Monday, January 09, 2012 9:44 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker
Q60?

Hmm.  So you just overlap a bunch of shrink wrap until you get up to the OD
you need?  There's a fair amount of space between the 5mm shaft and the prop
bore when I test fit it.

Peter+
On Mon, Jan 9, 2012 at 9:09 AM, J N Hiller < jnhiller at earthlink.net
<mailto:jnhiller at earthlink.net> > wrote:
I found telescoping sizes of heat shrink tubing in a package #278-1627B from
Radio Shack that when shrunk onto a 5 mm shaft bush nicely to the common
1/4" prop bore.
Jim Hiller

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
<mailto:nsrca-discussion-bounces at lists.nsrca.org>  [mailto:
nsrca-discussion-bounces at lists.nsrca.org
<mailto:nsrca-discussion-bounces at lists.nsrca.org> ]On Behalf Of Peter Vogel
Sent: Sunday, January 08, 2012 10:44 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

I've found lots of bushings to adjust an APC prop hub to a smaller shaft,
but I haven't found anything that seems like it would work with the Q60's
5mm bolt shaft...  looking for ideas...

Thanks,
Peter+

--
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




--
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120109/ae06c33f/attachment.html>