[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[J N Hiller]

I found telescoping sizes of heat shrink tubing in a package #278-1627B from
Radio Shack that when shrunk onto a 5 mm shaft bush nicely to the common
1/4" prop bore.
Jim Hiller

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Peter Vogel
Sent: Sunday, January 08, 2012 10:44 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

I've found lots of bushings to adjust an APC prop hub to a smaller shaft,
but I haven't found anything that seems like it would work with the Q60's
5mm bolt shaft...  looking for ideas...

Thanks,
Peter+

--
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120109/ebf08474/attachment.html>