[NSRCA-discussion] A question for the experts

[Andre Bouchard]

Loop "height" is related to loop radii, which must be the same for all radii.

Andre

Sent from my iPad

On May 27, 2011, at 9:24 AM, "ehaury" <ejhaury at comcast.net> wrote:

> From the FAI judges guide, 5B.7.4 - Stall Turns. "Drift of the model aircraft during the stalled condition
> must be ignored, provided the model aircraft does not drift outside the aerobatic zone."
> 
> Earl
> 
>  
> 
> ----- Original Message -----
> From: rcmaster199 at aol.com
> To: nsrca-discussion at lists.nsrca.org
> Sent: Friday, May 27, 2011 9:02 AM
> Subject: Re: [NSRCA-discussion] A question for the experts
> 
> I too have an issue to bring out on the M....... specifically the F3A M
>  
> A question, or closer to a statement actually, was posed to me at the recent contest regardng the height of the middle looping element.....that it did not have to have the same height as the entry/exit looping elements; that it specifically was not written anywhere so it didn't exist.
>  
> My response is that the geometry must be preserved. As long as I've flown pattern, this maneuver's geometry always required the looping elements to be at the same height. The way I see it, if looping element heights are to be different, we should see some verbiage to that effect in maneuver description
>  
> I don't have the maneuver description handy so if someone would please post it, I'd appreciate it
>  
> regards
>  
> MattK
> 
> 
> 
> -----Original Message-----
> From: tocdon <tocdon at netscape.net>
> To: nsrca-discussion <nsrca-discussion at lists.nsrca.org>
> Sent: Thu, May 26, 2011 11:34 pm
> Subject: [NSRCA-discussion] A question for the experts
> 
> A question for the judging experts.
>  
> Figure M, both Masters and FAI- Yes I know the bottom line rule the best presentation gets the best score, but a technical question.
>  
> Maneuver flow  in a crosswind.  Plane starts maneuver at 140 meters distance out.  During the first stall turn the plane drifts out (recall this is a stalled maneuver); second stall turn the plane drifts out again (same).  Now the plane wind corrects in all other aspects of the maneuver but exits approximately 20 meters further out than the entry and no defects observed, but exit distance is 160 meters.  What is the score given for this maneuver?
> 
> Best Regards,
>  
> Don
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110527/d54e9974/attachment.html>