[NSRCA-discussion] Brio Kit set-up

[Richard Strickland]

I had asked some of the same questions to Dave G. some time ago--here is his response:

> Richard,
> 
> The original settings for the Brio are as follows. They are starting
> points but will be close.
> 
> The C/G is 8" back from the wing leading edge at the fuselage side.
> 
> With the fuselage sitting on a level surface with the tail post blocked
> up 1", the stab is set at 0 degrees and the wing is set at 1/2 degree
> positive.
> 
> Control throws are:
> Ailerons 1/2" up and down
> Elevator 3/8 up and down
> Rudder 40 degrees left and right with 50% expo.
> 
> Some airplanes required some aileron differential and some did not. If
> required it will be more down than up because of the top hinging
> 
> Dave
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110103/9680ada7/attachment.html>