[NSRCA-discussion] Brio Kit set-up

[J N Hiller]

Would anyone care to share the CG location as a percentage of MAC.
Just curious!
Jim


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard
Strickland
Sent: Monday, January 03, 2011 8:26 AM
To: NSRCA
Subject: [NSRCA-discussion] Brio Kit set-up

I had asked some of the same questions to Dave G. some time ago--here is his
response:

> Richard,
>
> The original settings for the Brio are as follows. They are starting
> points but will be close.
>
> The C/G is 8" back from the wing leading edge at the fuselage side.
>
> With the fuselage sitting on a level surface with the tail post blocked
> up 1", the stab is set at 0 degrees and the wing is set at 1/2 degree
> positive.
>
> Control throws are:
> Ailerons 1/2" up and down
> Elevator 3/8 up and down
> Rudder 40 degrees left and right with 50% expo.
>
> Some airplanes required some aileron differential and some did not. If
> required it will be more down than up because of the top hinging
>
> Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110103/719552a5/attachment.html>