[NSRCA-discussion] exhaust temp of a ys 1.75

[Dave Burton]

Mike, I think you would have better success having someone TIG weld for you.
Call local welders for someone experienced in aluminum.

I understand the aluminum solder stuff is really tricky to use and the heat
has to be just right to work and not ruin the parts.

Dave Burton

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael S.
Harrison
Sent: Saturday, December 10, 2011 5:09 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] exhaust temp of a ys 1.75

 

(For all of you out there, can anyone tell me the exhaust temp approximately
of a YS 1.75.  I am building a Xurama and the muffler has to be
shortened(tuny's build thread).  I nedd to know if anyone has knowledge how
to solder aluminum and if you might have a site that would help me.  I
believe that there is a flus and an aluminum solder to do that.  please let
me know if you have any info on that.

Thanks

Mike  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20111210/e987e294/attachment.html>