[NSRCA-discussion] exhaust temp of a ys 1.75

[Randy Forbus]

http://durafix.com/ had good luck with this Dr. Mike
 



From: drmikedds at sbcglobal.net
To: nsrca-discussion at lists.nsrca.org
Date: Sat, 10 Dec 2011 16:08:51 -0600
Subject: [NSRCA-discussion] exhaust temp of a ys 1.75






(For all of you out there, can anyone tell me the exhaust temp approximately of a YS 1.75.  I am building a Xurama and the muffler has to be shortened(tuny’s build thread).  I nedd to know if anyone has knowledge how to solder aluminum and if you might have a site that would help me.  I believe that there is a flus and an aluminum solder to do that.  please let me know if you have any info on that.
Thanks
Mike  
_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20111210/f574c812/attachment.html>