[NSRCA-discussion] Condition in 9ZAP

[Ron Van Putte]

I'm not sure about the reason, but I suspect that it involves stick  
calibration.  Radio gurus like Tony Stillman and Jim Oddino will have  
to give the correct answer.

IF it's stick calibration, you can send it in Tony at Radio South for  
recalibration, or you can buy a device which is a combination 256K  
Campac and service menu (http://www.hansenhobbies.com/products/txacc/ 
256k/) and do the stick recalibration yourself.

BTW, try flipping the dual rate switches and see if there are neutral  
changes.  That's where my 9ZAP demonstrated its need for recalibration.

Ron Van Putte

On May 11, 2010, at 10:31 PM, Mike Moritko wrote:

> This evening, I activated an unused condition and assigned it to a  
> switch in my 9ZAP.  I then copied the default condition into the  
> newly activated condition.  However, when I throw the switch back  
> and forth between the default and the newly established condition,  
> my rudder and both aileron servos move off center a bit.  Is there  
> something in the programming for the default condition that isn't  
> carried over to the new condition during the copy  
> function....trims, subtrims, other?  I've reaccomplished this  
> several times and the result is always the same.  Has anyone else  
> come across this problem?  Thanks.
>
> Mike Moritko
>
> --------------------------------------------------
> From: "Bob Kane" <getterflash at yahoo.com>
> Sent: Tuesday, May 11, 2010 7:22 PM
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Subject: Re: [NSRCA-discussion] Karl Mueller update - good news!
>
>> Yes, like Andrew said, great news and thanks for the update.
>>
>> Bob Kane
>> getterflash at yahoo.com
>>
>>
>> --- On Tue, 5/11/10, Tom Simes <simestd at netexpress.com> wrote:
>>
>>> From: Tom Simes <simestd at netexpress.com>
>>> Subject: [NSRCA-discussion] Karl Mueller update - good news!
>>> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>>> Date: Tuesday, May 11, 2010, 10:35 AM
>>>
>>> I've been corresponding with Monica (Karl's daughter) and
>>> I'm happy to report that he is on the mend.  His
>>> eyesight is improving, doctors are granting him day passes
>>> out of the hospital and he is back on the NSRCA list.
>>> Apparently Karl even BBQ'd dinner when he was home last
>>> Sunday - quite an impressive improvement!
>>>
>>> To make it easier to access his e-mail, Karl has a new
>>> address with Gmail:
>>>
>>>  kgamueller at gmail.com
>>>
>>> Please update your address books.  Karl's access to
>>> e-mail is intermittent in the hospital, but feel free to
>>> drop him a line.
>>>
>>> Welcome back Karl :)
>>>
>>> -- Tom
>>>
>>> ==================================================================== 
>>> ==
>>>    "Z-80 system stack overflow.  Shut
>>> 'er down Scotty, the system's
>>>          sucking mud" - Error
>>> message on TRS 80 Model-16B
>>>
>>> Tom Simes
>>>
>>>          simestd at netexpress.com
>>> ==================================================================== 
>>> ==
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion