[NSRCA-discussion] Perry VP30 Pump

[Bob Wilson]

Thanks Vince.  The adjustment screw on my pump is hanging out about 1/4"
from the base...maybe more.  That just doesn't seem right.  But, if I try to
screw it in with the engine running it loads up and dies.  With it set the
way it is, the engine runs pretty good with the needle valve 3/4 open...but,
that doesn't seem right either.

Another thing I'm worried about is fuel continuing to drip out of the carb
when the engine is *not* running.

I'm probably going to have to suck in it and buy a new pump.

Are you going to make "The Fat Lake Pattern Rendezvous" this year (June
31-August 1)?  It's going to be bigger and better.  That is if it doesn't
rain again...ha!

Bob

On Tue, Mar 30, 2010 at 6:32 PM, Vicente "Vince" Bortone <
vicenterc at comcast.net> wrote:

> Hi Bob,
>
>
>
>  I remember this range 1/8" - 5/32".  I could be wrong since it has been a
> long time.  Let's see other recommendations.
>
>
>
> Good luck,
>
> Vicente "Vince" Bortone
>
>
> ----- Original Message -----
> From: "Bob Wilson" <wilsorc at gmail.com>
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Sent: Tuesday, March 30, 2010 5:40:19 PM GMT -06:00 US/Canada Central
> Subject: [NSRCA-discussion] Perry VP30 Pump
>
> I have a VP30  Perry pump on my O.S. 1.60.  Unfortunately, I've messed
> around with the adjustment screw and now have no clue where it was set
> originally.  Anyone have an idea how far out from the base the screw is set
> from the factory?
>
> _______________________________________________ NSRCA-discussion mailing
> list NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100330/564b7ff8/attachment.html>