[NSRCA-discussion] Perry VP30 Pump

[Vicente "Vince" Bortone]

Hi Bob, 



 I remember this range 1/8" - 5/32".  I could be wrong since it has been a long time.  Let's see other recommendations .  



Good luck, 

Vicente "Vince" Bortone 

----- Original Message ----- 
From: "Bob Wilson" < wilsorc @ gmail .com> 
To: "General pattern discussion" < nsrca -discussion at lists. nsrca .org> 
Sent: Tuesday, March 30, 2010 5:40:19 PM GMT -06:00 US/Canada Central 
Subject: [NSRCA-discussion] Perry VP30 Pump 

I have a VP30  Perry pump on my O.S. 1.60.  Unfortunately, I've messed around with the adjustment screw and now have no clue where it was set originally.  Anyone have an idea how far out from the base the screw is set from the factory? 

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists. nsrca .org http ://lists. nsrca .org/mailman/ listinfo / nsrca -discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100330/5f3b4563/attachment.html>