[NSRCA-discussion] Need Dremel Part
Ronald Van Putte
vanputte at cox.net
Wed Jul 7 18:38:33 AKDT 2010
Ahhh come on! The only time guys my age get an emotional warm fuzzy
is when we see that first cold brew at the end of a hot day.
RVP
On Jul 7, 2010, at 9:02 PM, Atwood, Mark wrote:
> Shhhhh ... he's old. I'm hoping he'll forget the details and just
> get an emotional warm fuzzy when I walk up to the flight line.
>
> Sent from my Verizon Wireless Phone
>
> ----- Reply message -----
> From: "Dave" <DaveL322 at comcast.net>
> Date: Wed, Jul 7, 2010 8:04 pm
> Subject: [NSRCA-discussion] Need Dremel Part
> To: "'General pattern discussion'" <nsrca-
> discussion at lists.nsrca.org>
>
> C’mon Mark….you should know RVP is way too smart to fall for trite
> flattery a mere week and half before the NATS <G>
>
> Given the praise you have for RVP, maybe you should have him check
> for flight readiness of both your airplanes before each flight this
> year…..doh!!!!
>
> Dave
>
> ________________________________
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-
> discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
> Sent: Wednesday, July 07, 2010 3:42 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Need Dremel Part
>
> One last point of clarification and then we should probably either
> talk about Dremel Parts or let this thread die….
>
> As much as I LOVE to spar with RVP and continuously dig him on
> about being older than the dead sea, I have to say it’s with much
> respect for having read a decade worth of every word he wrote for
> Model Aviation, an even larger respect for an Aeronautical
> Engineering degree (I’m an EE) that’s he’s had in practice all
> those centuries (not to mention must have acquired prior to the
> invention of flight, no small feat), and lastly as a role model
> for someone that still knows how to have fun, loves the sport of
> modeling, and despite what Dave Lockhart says about him, isn’t such
> a bad guy.
>
> Oh and Ron, I’m flying FAI… sooooo, yeah, you’ll probably be
> judging me :)
>
> Mark Atwood
> Paragon Consulting, Inc. | President
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
> Phone: 440.684.3101 x102 | Fax: 440.684.3102
> mark.atwood at paragon-inc.com<mailto:mark.atwood at paragon-inc.com> |
> www.paragon-inc.com<http://www.paragon-inc.com/>
>
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-
> discussion-bounces at lists.nsrca.org] On Behalf Of Ronald Van Putte
> Sent: Wednesday, July 07, 2010 3:27 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Need Dremel Part
>
> OK. Just to keep the record straight, Houston does assist me with
> some apps on my Droid, but you should ask Houston who he asks when
> he needs help with his OS 1.40RX.
>
> Ron VP
>
> On Jul 7, 2010, at 2:19 PM, Phil Spelt wrote:
>
> VERY well said, Jon...
>
> At 09:38 AM 7/7/2010, you wrote:
>
>
> Jon Lowe
>
>
> -----Original Message-----
> From: Ron Van Putte <vanputte at cox.net<mailto:vanputte at cox.net>>
> To: General pattern discussion <nsrca-
> discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
> Sent: Wed, Jul 7, 2010 8:25 am
> Yeah, but if you didn't have Houston Schweitzer around, you
> wouldn't know how to use that Droid! Everytime you want to do
> something, you hand it to him!!
>
> Jon
>
> To get the record straight: I retired from the USAF in 1979, from
> Civil Service in 1997 and started collecting Social Security the
> same year. You youngsters will never see Social Security, so I
> thank each and every one of you for my monthly check.
>
> Now about keeping up with the times: My cell phone is a Droid
> Incredible. What's yours whippersnapper?
>
> Ron VP
>
> On Jul 7, 2010, at 8:12 AM, Atwood, Mark wrote:
>
>> Better screws on the coffin lid??
>>
>> Seriously though, as one who still has my Dremel from 1973 (I
>> know, > you were already retired then right??) I finally broke
>> down and > bought a new one and have been wondering why I waited
>> so long. The > newer cordless lithium powered units rock. Take the
>> plunge...
>>
>> Mark Atwood
>> Paragon Consulting, Inc. | President
>> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
>> Phone: 440.684.3101 x102 | Fax: 440.684.3102
>> mark.atwood at paragon-inc.com<mailto:mark.atwood at paragon-inc.com> |
>> www.paragon-inc.com <http://www.paragon-inc.com />
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-
>> discussion-bounces at lists.nsrca.org> [ mailto:nsrca-> discussion-
>> bounces at lists.nsrca.org<mailto:nsrca-%3E%20discussion-
>> bounces at lists.nsrca.org>] On Behalf Of Ron Van Putte
>> Sent: Tuesday, July 06, 2010 2:58 PM
>> To: General pattern discussion
>> Subject: [NSRCA-discussion] Need Dremel Part
>>
>> I have an old Dremel Freewheeler Model 850 that has a flexible
>> coupler between the motor and the output shaft. This coupler is
>> splined on the inside and the splines finally wore out after 20+
>> years for no reason at all. It's on its third or fourth battery
>> pack, but still worked fine before the coupler gave out. I've tried
>> searching sources for Dremel parts but can't find what I need. I
>> would just buy a new one, but I am stubborn and the son of a Scottish
>> mother, who would rise up out of her grave if I did.
>>
>> Any ideas?
>>
>> Ron Van Putte
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-
>> discussion at lists.nsrca.org>
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://
>> lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-
>> discussion at lists.nsrca.org>
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://
>> lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-
> discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://
> lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-
> discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> --> There are only two types of aircraft -- fighters and targets.
>
> Phil Spelt, Past President, Knox County Radio Control Society, Inc.
> URL: http://www.kcrctn.com
> <http://www.kcrctn.com/>AMA--1294, Scientific Leader Member
> SPA--177, Board Member
> My URL: http://mywebpages.comcast.net/~chuenkan/
> (865) 435-1476 v (865) 604-0541 c
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-
> discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list