[NSRCA-discussion] Need Dremel Part

[Atwood, Mark]

Shhhhh ...  he's old. I'm hoping he'll forget the details and just get an emotional warm fuzzy when I walk up to the flight line.

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Dave" <DaveL322 at comcast.net>
Date: Wed, Jul 7, 2010 8:04 pm
Subject: [NSRCA-discussion] Need Dremel Part
To: "&apos;General pattern discussion&apos;" <nsrca-discussion at lists.nsrca.org>

C’mon Mark….you should know RVP is way too smart to fall for trite flattery a mere week and half before the NATS  <G>

Given the praise you have for RVP, maybe you should have him check for flight readiness of both your airplanes before each flight this year…..doh!!!!

Dave

________________________________
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Wednesday, July 07, 2010 3:42 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Need Dremel Part

One last point of clarification and then we should probably either talk about Dremel Parts or let this thread die….

As much as I LOVE to spar with RVP and continuously dig him on about being older than the dead sea, I have to say it’s with much respect for having read a decade worth of every word he wrote for Model Aviation, an even larger respect for an Aeronautical Engineering degree (I’m an EE) that’s he’s had in practice all those centuries (not to mention must have acquired prior to the invention of flight, no small feat),  and lastly as a role model for someone that still knows how to have fun, loves the sport of modeling, and despite what Dave Lockhart says about him, isn’t such a bad guy.

Oh and Ron, I’m flying FAI… sooooo, yeah, you’ll probably be judging me :)

Mark Atwood
Paragon Consulting, Inc.  |  President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
Phone: 440.684.3101 x102  |  Fax: 440.684.3102
mark.atwood at paragon-inc.com<mailto:mark.atwood at paragon-inc.com>  |  www.paragon-inc.com<http://www.paragon-inc.com/>

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ronald Van Putte
Sent: Wednesday, July 07, 2010 3:27 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Need Dremel Part

OK.  Just to keep the record straight, Houston does assist me with some apps on my Droid, but you should ask Houston who he asks when he needs help with his OS 1.40RX.

Ron VP

On Jul 7, 2010, at 2:19 PM, Phil Spelt wrote:

VERY well said, Jon...

At 09:38 AM 7/7/2010, you wrote:


Jon Lowe


-----Original Message-----
From: Ron Van Putte <vanputte at cox.net<mailto:vanputte at cox.net>>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Wed, Jul 7, 2010 8:25 am
Yeah, but if you didn't have Houston Schweitzer around, you wouldn't know how to use that Droid!  Everytime you want to do something, you hand it to him!!

Jon

To get the record straight: I retired from the USAF in 1979, from Civil Service in 1997 and started collecting Social Security the same year. You youngsters will never see Social Security, so I thank each and every one of you for my monthly check.

Now about keeping up with the times: My cell phone is a Droid Incredible. What's yours whippersnapper?

Ron VP

On Jul 7, 2010, at 8:12 AM, Atwood, Mark wrote:

> Better screws on the coffin lid??
>
> Seriously though, as one who still has my Dremel from 1973 (I know, > you were already retired then right??) I finally broke down and > bought a new one and have been wondering why I waited so long. The > newer cordless lithium powered units rock. Take the plunge...
>
> Mark Atwood
> Paragon Consulting, Inc. | President
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
> Phone: 440.684.3101 x102 | Fax: 440.684.3102
> mark.atwood at paragon-inc.com<mailto:mark.atwood at paragon-inc.com> | www.paragon-inc.com <http://www.paragon-inc.com />
>
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org> [ mailto:nsrca-> discussion-bounces at lists.nsrca.org<mailto:nsrca-%3E%20discussion-bounces at lists.nsrca.org>] On Behalf Of Ron Van Putte
> Sent: Tuesday, July 06, 2010 2:58 PM
> To: General pattern discussion
> Subject: [NSRCA-discussion] Need Dremel Part
>
> I have an old Dremel Freewheeler Model 850 that has a flexible
> coupler between the motor and the output shaft. This coupler is
> splined on the inside and the splines finally wore out after 20+
> years for no reason at all. It's on its third or fourth battery
> pack, but still worked fine before the coupler gave out. I've tried
> searching sources for Dremel parts but can't find what I need. I
> would just buy a new one, but I am stubborn and the son of a Scottish
> mother, who would rise up out of her grave if I did.
>
> Any ideas?
>
> Ron Van Putte
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion%A0>
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

--> There are only two types of aircraft -- fighters and targets.

Phil Spelt, Past President, Knox County Radio Control Society, Inc.
       URL: http://www.kcrctn.com
<http://www.kcrctn.com/>AMA--1294,  Scientific Leader Member  SPA--177, Board Member
      My URL: http://mywebpages.comcast.net/~chuenkan/
      (865) 435-1476 v  (865) 604-0541 c
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion