[NSRCA-discussion] Perry VP30 Question

[Jon Lowe]

 I've mounted them in all kinds of ways and never had a problem.  After all, your plane will be in all kinds of attitudes when it is flying!

 

Jon Lowe
 

 

-----Original Message-----
From: Pascoe,Tim [Burlington] <Tim.Pascoe at ec.gc.ca>
To: nsrca-discussion at lists.nsrca.org
Sent: Mon, Feb 15, 2010 9:53 pm
Subject: [NSRCA-discussion] Perry VP30 Question



I'm putting together a practice plane with an OS1.60, including a Perry VP30 
pump. I've never used a Perry pump before, and am wondering about the mounting 
instructions. It says to ensure that the inflow/outflow nipples are mounted 
horizontally, with the bleed hole down. However, I'm finding it tough to get a 
place near the engine where I can mount it this way.

1) Does it have to be close to the engine (can I mount it inside the fuse behind 
the firewall by 4-5 inches)?
2) Can I mount it with the inflow/outflow vertical, and closer to the engine?

Thanks,

Tim 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100216/a6c4e2fa/attachment.html>